OBJ Export for AutoCAD is a Wavefront (.obj) file export plug-in for AutoCAD. This plug-in gives AutoCAD the ability to export geometric data from AutoCAD to ASCII and Binary OBJ files.

OBJ Export for AutoCAD extracts facet data from 3D Face, Polygon Mesh, PolyFace Mesh and 3D Solid objects in the active AutoCAD drawing and exports it to a OBJ file. 3D Solids are tessellated into triangular faces. The level of tessellation can be controlled by adjusting the resolution slider in the OBJ Export for SolidWorks options dialog box. A lower resolution will yield coarse meshes (lesser faces), whereas a higher resolution will result in finer meshes (more faces).

OBJ Export for AutoCAD is very easy to use. Once installed, it must be loaded into the AutoCAD environment. There are simple instructions for this in the ReadMe file. Once loaded it adds new commands to AutoCAD's existing commands and a new submenu called "OBJExport" to the AutoCAD menu containing these newly added commands.

OBJ Export for AutoCAD is designed to work with the following versions of AutoCAD:

• AutoCAD 2012 (32 & 64 Bit)
  
  
• AutoCAD 2011 (32 & 64 Bit)
  
  
• AutoCAD 2010 (32 & 64 Bit)
  
  
• AutoCAD 2009 (32 & 64 Bit)
  
  
• AutoCAD 2008 (32 & 64 Bit)
  
  
• AutoCAD 2007 (32 Bit)
  
  

System Requirements

Below is the hardware, software and operating system requirements for AutoCAD plug-ins running on the Microsoft Windows platform.

• AutoCAD (32 Bit and 64 Bit): 2007, 2008, 2009, 2010, 2011, 2012
  
  
• Operating System (32 Bit and 64 Bit): Windows XP SP2 or later, Windows Vista and Windows 7
  
  
• RAM: 1 GB (Recommended 2 GB)

Download & Purchase

Please download a fully functional trial of OBJ Export for AutoCAD by clicking on the "Download Now" button below. To start using the software, you need a license key. A license key can be of two types: Trial or Permanent. A trial key is issued to you on the purchase of '7 day license' so that you may try the software before you purchase a permanent key. A permanent key is issued after you have purchased a license. We are confident that during the trial period (7 days with unlimited runs) you will find OBJ Export for AutoCAD extremely useful. Later when you decide to buy the software please return to this page and click the "Buy with/without Subscription" button to place your order. Upon verifying the order you will recieve an e-mail with instructions on how to obtain your permanent key. We will create and send you your Key by e-mail within one business day. To avoid disruption in your workflow we urge you to place your order before the trial period ends.

		9.70 MB
		$19.99
		$299
		$249

IMPORTANT! Purchasing a Subscription is highly recommended since it the most cost effective way of keeping your software up to date. Moreover, Subscription entitles you to get a second free perpetual license for your laptop, among many other benefits. For details please read the SYCODE License and Subscription Frequently Asked Questions (FAQ).

Our licenses are single computer licenses and are locked to each computer they are installed on. Basically, the license key is specific to the computer's Host ID (the MAC address of the computer), and will not work on another computer. The installer picks up the physical MAC address of the network card connected to the computer which is basically “Ethernet adapter Network Connect Adapter”. So unless you change your network card, the key will always work even if you reinstall your operating system. If your internal network is periodically assigning a different Host ID to your computer, then please find a solution for this with your IT department.

Note: Downloading this software indicates your acceptance to the SYCODE Software License Agreement. The price mentioned above is for a single user license. For your bulk-licensing needs please contact us.

Since OBJ Export for AutoCAD is a plug-in for AutoCAD, it must be loaded into the AutoCAD environment before it can be used. Please follow the simple instructions in the OBJ Export for AutoCAD ReadMe document which is copied into the installation folder. If you accept the default values in the installer, OBJ Export for AutoCAD will be up and running within a minute. However, if you choose to modify the values (for example, install the software at a location other than the default) then you will have to take extra care to see that AutoCAD and the OBJ Export for AutoCAD plug-in are properly setup and recognize each other. For an easy and straight forward installation, simply run the installer and accept the default installation options.  After you have loaded the plug-in file into AutoCAD, simply click on the menu items in the "OBJExport" submenu to run these new commands. Truly, software made simple!

The 'OBJExport' menu consists of the following commands:

• OBJExport - Exports an OBJ file
  
  
• OBJExportHelp - Displays the OBJ Export for AutoCAD help file
  
  
• OBJExportRegister - Registers your copy of OBJ Export for AutoCAD
  
  
• OBJExportAbout - Displays the OBJ Export for AutoCAD About box
  

OBJ Export for AutoCAD comes with detailed documentation for each command as well as a tutorial to get you started in the shortest possible time. There is also a PDF version of the help file which you can download by clicking the link below.
   

The OBJ file format is a geometry definition file format first developed by Wavefront Technologies for its Advanced Visualizer animation package. The file format is open and has been adopted by other 3D graphics application vendors, making it a universally accepted geometry file format. The OBJ file format is a simple data format that represents 3D geometry alone - namely, the position of each vertex, the texture coordinate associated with a vertex, the normal at each vertex, and the faces that make each polygon.

Customization

If you want OBJ Export for AutoCAD to work in a different way to suit your workflow, do let us know. We will customize the plug-in to suit your specific needs.